Fully bunded dispensing tank with guarded padlock access into the pump compartment. Fitted with Cube 56 electric pump as standard. Other types of pump available upon request including hand pump.
Large cavity inside so it’s easy to get the hose in and out and you have room to store 25 litre containers if required.
Channels welded to the base to allow air to circulate and lifting lugs fitted as standard (for lifting when empty only)
Float type contents gauge fitted with guide tube underneath to stop the float getting stuck on the tank stays.
Painted in a choice of light green, dark green, black, blue or brown as standard (other colours available upon request).
These tanks are all made to order so if you would prefer alternative outlets or inlets please specify on your order as these can usually be done for a small extra cost.
Installation requirements – Tanks should be installed by an OFTEC engineer (or equivalent) in accordance with OFTEC regulations see http://www.oftec.org/
All tanks should also be dipped annual for water and if any is found present it must be removed straight away. All tanks are pressure tested for leaks on manufacture and come with a 5 year guarantee if installed and maintained correctly. Any chips to the paintwork on the installation must be touched up with the tin of touch up paint provided.
Lead time usually 3-4 weeks from order but please ring to check.
Prices displayed for this item are inclusive of delivery to addresses in England and Wales only. Delivery to Scotland, offshore addresses, Highlands, Islands and Northern Ireland including postcodes PA,PH,DD,AB,IV,KW & BT may be available, please contact us with your postcode for a price. This is subject to access for an articulated lorry. If access to your address is restricted please advise at the time of placing your order to allow for the arrangement of a smaller delivery vehicle.
Tail lift offload usually available down to curbside.